CONTACT NUMBER:
15032073555
Matters needing attention in the operation of foam cutting machine:
1. Before starting the machine, check whether the circuit of the machine is broken, whether the switch works well, whether the hot wire is straight and there are no obstacles.
2. After startup, check whether there are obstacles on the working face. If there are obstacles, they must be removed.
3. In case of emergency during operation, turn off the power to prevent accidents.
4. It is strictly prohibited to remove relevant parts at will.
5. Do not change the relevant parameters of the voltage regulator to avoid failure.
6. The cutting machine shall be installed at the place with small impact vibration, and there shall be no equipment with large vibration such as forging hammer and large press nearby.
Copyright © Xinji Golden Phoenix Industrial and Trade Co, Ltd.