Characteristics of EPS fully automatic foam forming machine

　　EPS fully automatic foam forming machine features:

　　1) the foam products produced by various specifications have low water content, low energy consumption and stable size.

　　2) It can perform four operation modes: full-automatic, semi-automatic, intermediate start and manual operation.

　　3) Mechanical demoulding, the demoulding position can be adjusted with different product thickness.

　　4) Safety door interlock, pause switch and emergency stop can ensure safe and reliable operation.

　　5) Screen display, graphical interface, Chinese display, soft buttons and other man-machine dialogue modes.

　　6) The guide and load-bearing of the mobile template are separated, which greatly prolongs the service life of the guide column.

　　Pipe joints and oil plugs of EPS fully automatic foam forming machine: most of the oil leakage of pipe joints occurs in connection parts of manifold blocks, valve bottom plates, tubular components and fittings, Mina. When pipe joints are connected by metric thread, the leakage of combined gaskets will be severe. When the taper pipe thread is connected, the thread and the screw plug cannot be completely matched, which is easy to leak oil. Once the above two situations occur, it will be very difficult to cure them. They can only be filled and sealed with liquid sealant or PTFE raw material belt.