Preparation work before using EPS machinery

　　Before using the EPS machinery, it is necessary to do some corresponding preparations to make the EPS machinery run smoothly.

　　When the raw material has exceeded the service life, the foaming agent in the EPS raw material is volatilized into the air, which cannot guarantee that the EPS raw material can emit the correct ratio. If there are too many powders in the raw material, it will block the material of the EPS foam machine. The feeding port of the barrel will also block the vent groove in the pre-expansion machine barrel, making the emitted particles easy to agglomerate and uneven foaming. If the steam required by the EPS machinery is saturated steam, whether the steam is saturated steam is critical in the production process.

　　If the steam pipe is too long, the steam pipe is too small, and the steam pressure of the boiler is not enough, it is easy to form water vapor, which affects the whole The quality of EPS machinery products. The compressed air needs to be purified, water-free and dust-free gas.

　　It is more important to make preparations before using the EPS machinery. Otherwise, the EPS machinery is easier to damage, and the corresponding preparations can reduce the probability of damage to the EPS machinery. Conducive to the extended use of EPS machinery.